![]() ![]() You'll have to take the little electric board off that you see on the If that's dirty, it will give a disk read error. You'll see a larger lens that is usually very dirty (this lens is a Or torx) that you have to remove to take the upper little lens off. Lense upside-down and you'll find there are 2 screws (silver, phillips Lens off these 2 rails and take the black plastic cover off. The lens is too high and requires adjustment. Torx screw (black) that move the lens up and down on the rail. ![]() ![]() Right side of the lens) are dirty or you have to bore then out Usually the holes where the rail is (on the Which the lens move must be very slippery - which can be lubricated Sometimes it looks Ok, but you may need to remove the lens and A bad contact here can cause disk readĮrrors. The white plastic gear that moves the laser must makeĬontact with the "motor".You have to take the box apart and clean the lens.Ok ! SOURCE: Will play CD's but not DVD's or Games ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |